Very strong and deadly earthquake M6.9 hit border region of Mexico and Guatemala

massive-earthquake-m7-1-hit-border-region-of-mexico-and-guatemala

A very strong and deadly earthquake measuring M6.9 (downgraded from M7.1 (USGS)) on the Richter scale hit border region of Mexico and Guatemala on July 7, 2014, at 11:23 UTC (06:23 local time). USGS is reporting depth of 60 km (37.3 miles). EMSC is reporting M7.0 at depth of 90 km (preliminary data).

SSN Mexico has reported M6.9 at a depth of 60 km.

Epicenter was located 2 km (1 miles) NNE of Puerto Madero, Mexico, 22 km (14 miles) SW of Tapachula, Mexico, 29 km (18 miles) NW of Suchiate, Mexico, 29 km (18 miles) WNW of Ciudad Tecun Uman, Guatemala, and 204 km (127 miles) W of Guatemala City, Guatemala

There are 2 837 297 people living within 100 km radius.

There are 3 confirmed deaths so far in Guatemala, and one death in Mexico. Also there are reported 21 injured persons. A preliminary statement shows that 48 houses collapsed in San Marcos, Guatemala. The authorities are working on unblocking some access routes in the region affected by landslides. (ER)

Mexico local news media reported the quake was felt strongly in the Mexican states of Chiapas and Tabasco.

Many landslides are reported throughout the region.

USGS issued yellow alert level for shaking-related fatalities. Some casualties are possible. Orange alert level was issued for economic losses. Significant damage is likely and the disaster is potentially widespread. Estimated economic losses are less than 1% of GDP of Mexico. Past events with this alert level have required a regional or national level response.

Overall, the population in this region resides in structures that are a mix of vulnerable and earthquake resistant construction. The predominant vulnerable building types are mud wall and concrete/cinder block masonry construction.

Recent earthquakes in this area have caused secondary hazards such as tsunamis, landslides, and fires that might have contributed to losses.

Updates:

16:16 UTC: The earthquake death toll has increased to at least 6 – 3 in Chiapas, Mexico and 3 in Guatemala

***

Tectonic summary

The July 7, 2014 M 6.9 earthquake near the coast of Chiapas, Mexico occurred as the result of normal faulting at a depth of 60 km. The earthquake occurred near the border between Mexico and Guatemala, near Puero Madero, Mexico, and about 200 km from Guatemala City, Guatemala, which has a population of one million people. At the location of the earthquake, the Cocos plate subducts to the northeast beneath the North America plate at a velocity of approximately 79 mm/yr, forming the Middle America subduction zone. The mechanism of the earthquake is consistent with extension within the down-going Cocos slab. The earthquake occurred below and to the east of the slab interface where larger, thrust-type earthquakes can occur.

The region around the July 7 earthquake is highly seismically active, having produced 12 events of M7.0 or greater since 1902 within 200 km of the epicenter. Most recently, an M7.4 event occurred in November 2012 on the subduction zone interface 123 km southeast of the July 7 event. Other notable events include an M7.2 in 1993 which caused 1 casualty in western Guatemala; an M7.7 in 1942 with 38 casualties and widespread damage, and two events of M7.8 and 7.5 in 1902.

Population exposure

Population per ˜1 sq. km. from LandScan

Selected cities exposed

from GeoNames Database of Cities with 1,000 or more residents.

MMI City Population
VII Puerto Madero 10k
VII La Libertad 4k
VII Ciudad Tecun Uman 11k
VII Mazatan 6k
VII Alvaro Obregon 5k
VII Frontera Hidalgo 3k
V Quetzaltenango 132k
IV Chimaltenango 82k
IV Escuintla 103k
III Guatemala City 995k
III Tuxtla Gutierrez 481k

(k = x1,000)

Seismotectonics of the Caribbean Region and Vicinity

Extensive diversity and complexity of tectonic regimes characterizes the perimeter of the Caribbean plate, involving no fewer than four major plates (North America, South America, Nazca, and Cocos). Inclined zones of deep earthquakes (Wadati-Benioff zones), ocean trenches, and arcs of volcanoes clearly indicate subduction of oceanic lithosphere along the Central American and Atlantic Ocean margins of the Caribbean plate, while crustal seismicity in Guatemala, northern Venezuela, and the Cayman Ridge and Cayman Trench indicate transform fault and pull-apart basin tectonics.

Along the northern margin of the Caribbean plate, the North America plate moves westwards with respect to the Caribbean plate at a velocity of approximately 20 mm/yr. Motion is accommodated along several major transform faults that extend eastward from Isla de Roatan to Haiti, including the Swan Island Fault and the Oriente Fault. These faults represent the southern and northern boundaries of the Cayman Trench. Further east, from the Dominican Republic to the Island of Barbuda, relative motion between the North America plate and the Caribbean plate becomes increasingly complex and is partially accommodated by nearly arc-parallel subduction of the North America plate beneath the Caribbean plate. This results in the formation of the deep Puerto Rico Trench and a zone of intermediate focus earthquakes (70-300 km depth) within the subducted slab. Although the Puerto Rico subduction zone is thought to be capable of generating a megathrust earthquake, there have been no such events in the past century. The last probable interplate (thrust fault) event here occurred on May 2, 1787 and was widely felt throughout the island with documented destruction across the entire northern coast, including Arecibo and San Juan. Since 1900, the two largest earthquakes to occur in this region were the August 4, 1946 M8.0 Samana earthquake in northeastern Hispaniola and the July 29, 1943 M7.6 Mona Passage earthquake, both of which were shallow thrust fault earthquakes. A significant portion of the motion between the North America plate and the Caribbean plate in this region is accommodated by a series of left-lateral strike-slip faults that bisect the island of Hispaniola, notably the Septentrional Fault in the north and the Enriquillo-Plantain Garden Fault in the south. Activity adjacent to the Enriquillo-Plantain Garden Fault system is best documented by the devastating January 12, 2010 M7.0 Haiti strike-slip earthquake, its associated aftershocks and a comparable earthquake in 1770.

Moving east and south, the plate boundary curves around Puerto Rico and the northern Lesser Antilles where the plate motion vector of the Caribbean plate relative to the North and South America plates is less oblique, resulting in active island-arc tectonics. Here, the North and South America plates subduct towards the west beneath the Caribbean plate along the Lesser Antilles Trench at rates of approximately 20 mm/yr. As a result of this subduction, there exists both intermediate focus earthquakes within the subducted plates and a chain of active volcanoes along the island arc. Although the Lesser Antilles is considered one of the most seismically active regions in the Caribbean, few of these events have been greater than M7.0 over the past century. The island of Guadeloupe was the site of one of the largest megathrust earthquakes to occur in this region on February 8, 1843, with a suggested magnitude greater than 8.0. The largest recent intermediate-depth earthquake to occur along the Lesser Antilles arc was the November 29, 2007 M7.4 Martinique earthquake northwest of Fort-De-France.

The southern Caribbean plate boundary with the South America plate strikes east-west across Trinidad and western Venezuela at a relative rate of approximately 20 mm/yr. This boundary is characterized by major transform faults, including the Central Range Fault and the Boconó-San Sebastian-El Pilar Faults, and shallow seismicity. Since 1900, the largest earthquakes to occur in this region were the October 29, 1900 M7.7 Caracas earthquake, and the July 29, 1967 M6.5 earthquake near this same region. Further to the west, a broad zone of compressive deformation trends southwestward across western Venezuela and central Columbia. The plate boundary is not well defined across northwestern South America, but deformation transitions from being dominated by Caribbean/South America convergence in the east to Nazca/South America convergence in the west. The transition zone between subduction on the eastern and western margins of the Caribbean plate is characterized by diffuse seismicity involving low- to intermediate-magnitude (M<6.0) earthquakes of shallow to intermediate depth.

The plate boundary offshore of Colombia is also characterized by convergence, where the Nazca plate subducts beneath South America towards the east at a rate of approximately 65 mm/yr. The January 31, 1906 M8.5 earthquake occurred on the shallowly dipping megathrust interface of this plate boundary segment. Along the western coast of Central America, the Cocos plate subducts towards the east beneath the Caribbean plate at the Middle America Trench. Convergence rates vary between 72-81 mm/yr, decreasing towards the north. This subduction results in relatively high rates of seismicity and a chain of numerous active volcanoes; intermediate-focus earthquakes occur within the subducted Cocos plate to depths of nearly 300 km. Since 1900, there have been many moderately sized intermediate-depth earthquakes in this region, including the September 7, 1915 M7.4 El Salvador and the October 5, 1950 M7.8 Costa Rica events.

The boundary between the Cocos and Nazca plates is characterized by a series of north-south trending transform faults and east-west trending spreading centers. The largest and most seismically active of these transform boundaries is the Panama Fracture Zone. The Panama Fracture Zone terminates in the south at the Galapagos rift zone and in the north at the Middle America trench, where it forms part of the Cocos-Nazca-Caribbean triple junction. Earthquakes along the Panama Fracture Zone are generally shallow, low- to intermediate in magnitude (M<7.2) and are characteristically right-lateral strike-slip faulting earthquakes. Since 1900, the largest earthquake to occur along the Panama Fracture Zone was the July 26, 1962 M7.2 earthquake. (USGS) More information on regional seismicity and tectonics

References for the Panama Fracture Zone: 
Molnar, P., and Sykes, L. R., 1969, Tectonics of the Caribbean and Middle America Regions from Focal Mechanisms and Seismicity: Geological Society of America Bulletin, v. 80, p. 1639-1684.

Featured image: USGS

Share:

Commenting rules and guidelines

We value the thoughts and opinions of our readers and welcome healthy discussions on our website. In order to maintain a respectful and positive community, we ask that all commenters follow these rules:

  • Treat others with kindness and respect.
  • Stay on topic and contribute to the conversation in a meaningful way.
  • Do not use abusive or hateful language.
  • Do not spam or promote unrelated products or services.
  • Do not post any personal information or content that is illegal, obscene, or otherwise inappropriate.

We reserve the right to remove any comments that violate these rules. By commenting on our website, you agree to abide by these guidelines. Thank you for helping to create a positive and welcoming environment for all.

Leave a reply

Your email address will not be published. Required fields are marked *